Top Jewellery Polishing Tips | The Bench

Accomplishing a lovely end is a crucial phase of jewellery generation and can truly make or break a piece. Sharpening can be really complicated at to start with as there are several stages associated in accomplishing a thriving glow so to acquire some of the discomfort out of sharpening, we have place together some  best guidelines to support you on your way to a flawless finish. 

Pumice Powder

Pumice Powder is an abrasive powder that can be made use of damp, with a brush or as a paste to clear up steel, pre and publish soldering. It creates a lovely white, matt and grease-no cost end which will allow you to clearly see any marks or scratches which will subsequently will need to be taken off. It’s best as the first stage soon after finishing a piece, as it permits you to see which stage you have reached.

Remember to note to make guaranteed any pumice residue is absolutely washed away right before transferring onto the up coming phase.

Bag of pumice powder.

Pumice Powder 1kg

Really don’t skimp on the preparing

It is not possible to achieve a good polish devoid of initially taking away the scratches on the surface area of the metal. This is completed in the first instance with a file employing sleek, ongoing strokes, operating in a single path. As with all polishing procedures you always get the job done from coarse to sleek, so use a medium or coarse slice file to take out any stubborn scratches and then shift on to a finer lower to sleek off completely ready for the upcoming stage

Just take your time

The use of damp and dry papers or emery papers is 1 of the most time-consuming stages of the whole sharpening approach and desires to be performed steadily doing the job from coarse to easy from 500 grit to close to 1200 grit. While there are no shortcuts, there are some merchandise which will make your life a lot easier


Micro-mesh is a cushioned abrasive material which is versatile, allowing for it to self-stage, so preventing any unwanted scratches from being made from some of the coarser grits. The adaptable cloth backing doesn’t rip, and it doesn’t get overloaded with waste material thanks to the spacing of the grit particles. It can be cleaned and reused which also tends to make it incredibly price tag efficient. The firmer backing content allows you to put a lot more force on whilst doing the job which eventually speeds up the job, so these are really handy consumables to have around.

Micromesh Starter Package

Shortcut for specific work

Immediately after the emery paper phase, it is correctly feasible to barrel polish specific parts to a satisfactory end working with mixed steel shot and polishing compound such as Barrelbrite. There are a number of golden principles to recall:

· Under no circumstances overload the barrel with much too quite a few pieces as they may well injury one another.

· Normally ensure any parts with holes have wire threaded by means of and secured to stop the shot from jamming together within.

· By no means place chains into a barrel polisher without having to start with threading them on to a wire and securing.

· Really do not try to barrel polish items with bigger, simple locations of steel on exhibit as these will turn out to be pitted by the shot and not reach a fantastic polish.

· Try to remember, extra Barrelbrite doesn’t equivalent a far better polish. Comply with the recommendations to the letter normally you could uncover foam spilling out from the prime of your barrel.

Mop Polishing de-mystified:

In uncomplicated conditions, mop polishing is performed in two levels: cutting and polishing.

Polishing Mop


Reducing works by using a coarser compound (e.g. Tripoli) and a more challenging mop and is exactly where you will get any remaining scratches out which are leftover from submitting and the damp and dry paper stage. The notion is to pre-polish right before the final polish. Ideally, you will need to use a stitched or felt mop


Sharpening makes use of a finer compound (e.g. Rouge) and a softer mop to buff your metal up to a higher shine. Mops can be created of free fold swansdown, chamois and super tender cotton.

Below is a listing of important factors to preserve in head:

· Polish is utilized to the mop as soon as it is rotating not when it is stationary. Simply just thrust the bar of polish towards the reduced 50 % of the wheel for a next or two even though holding firmly.

· Always polish items working with the reduced half of the polishing mop, that way if the piece flies out of your hand it will go into the back of the machine not throughout the space.

· If you are obtaining black sludge all over your steel, you have overloaded the mop with way too a great deal polish. Wash the piece in warm soapy drinking water to get rid of it and carry on.

· Any smaller or fiddly objects this sort of as chains can be held in opposition to a flat piece of wood or a mandrel to make sprucing much easier when they heat up. (Be certain they are flush versus the surface area to prevent the wheel from grabbing them).

· While it is tempting, never, ever put on gloves when sharpening as this is a basic safety hazard. If your fingers need some security from the warmth, use protecting finger tape or finger defense skins.

Leather Finger Protector Compact Pack of 5

Ideally this will give you an insight into how to obtain a flawless end utilizing the accurate tactics.

Save this for later

Author: Cooksongold